Voddic Academy
Voddic Academy trains engineers on the same control logic Voddic LTD ships into real panels: motor starters, SCADA dashboards, and PLC-driven lines. Every sandbox below is wired live in your browser — drag real conductors, trip real setpoints, watch a real ladder rung fire — so what you learn here is exactly what goes into the field.
Three-Phase Contactor — Motor Starter Sandbox
Live status
Power mode
Wiring checklist
Controls
📚 Core Educational Insights
Wire the panel exactly like a real motor starter: supply → main poles → motor, and a separate control loop of Stop → Start → coil, with the 13-14 auxiliary contact sealing the coil in once it pulls. Switch Power Mode to Automatic to see how the same contactor behaves under a sensor or timer signal instead of a human pressing Start — the physics of the coil and contacts don't change, only what's driving them.
Why manual and automatic both matter
A push-button station is a person closing the start circuit. An automatic controller — a float switch, thermostat, PLC output, timer — closes that same circuit without a person. Both rely on the identical coil, main poles, and seal-in contact you just wired.
⚙️ Commercial Scalability & System Integrity
This sandbox mirrors the control logic Voddic LTD builds into real panels — DOL starters, seal-in circuits, and PLC-driven automatic starts — before anything is fabricated or shipped to site.
🔒 System Engineering Highlights
- Manual/Auto Failover: Panels are designed so an automatic controller can drive the same coil a human operator uses, with no rewiring.
- Enterprise Portability: Control logic validated here maps directly onto real IEC-rated contactors and PLC I/O in the field.
SCADA Water-Tank Monitoring System
Run the inflow and outflow pumps, set your high/low alarm thresholds, and watch the level transmitter (LT-101) drive a live trend — the same mimic-diagram-plus-trend pattern used on real plant SCADA screens.
Live readouts
Pump control
Setpoints
Controls
PLC-Controlled Sorting Conveyor
A photo-eye counts boxes on the belt; once the counter reaches its preset, a timed diverter rejects the next box off the line. Change the counter preset, timer preset, and belt speed below and watch the ladder rungs on the right respond in real time.
Live status
Run control
Editable parameters
Controls
Ladder / instruction-list view
50 Projects Across Panels, PLCs & IoT
A cross-section of the work behind these sandboxes — motor-control panel builds, SCADA and PLC integrations, and the IoT/software platforms Voddic LTD has shipped for clients.